Overview

The Settings Screen houses all editable Global Settings for Prism. These are applied per instance of the plug-in, allowing for the stacking of effects when using multiple instances of Prism on different MIDI tracks within the DAW.

Light

The Light encoding can be configured for SpectraStrobe, AudioStrobe, or Disabled (audio-only) output.

• Light Encoding Controls the output encoding for the Light signals (SpectraStrobe, AudioStrobe, Disabled).
• LED Gamma Adjusts the LED brightness Gamma Correction Curve, which can help align the expected output with the perceived levels in SpectraStrobe LED glasses. The Default value should be ideal.
• Ref. Tone dB Output Level for the SpectraStrobe Reference Tone.
• Red dB Output Level for the Red Tone.
• Green/AS dB Output Level for the Green/AudioStrobe Tone.
• Blue dB Output Level for the Blue Tone.

Output Routing

The Output Routing section allows for configuring each signal source from Prism to be routed to a separate (or shared) output bus. Each signal source can also be disabled entirely, as an option.

There are 6 stereo output buses available, the default is Output 1. Compatible DAWs can access and route the output buses to their own audio/mixer track for fine-grained mixing control.

• SS Ref Tone Audio bus routing for the Reference Tone.
• Red Audio bus routing for the Red Tone.
• Green/AudioStrobe Audio bus routing for the Green/AudioStrobe Tone.
• Blue Audio bus routing for the Blue Tone.
• Sound Audio bus routing for the Sound (Isochronic or Binaural) Tone.
• Vibration Audio bus routing for the Vibration Tone.
• Aux. Input Audio bus routing for the Aux. Input signal.

General

• Reset to Factory Defaults Resets all settings of this plug-in instance to their Factory Default values.
• Save System Log File Outputs a log file that can be saved and shared with Cymatic Somatics Support.